#Loxone climate controller Pc
#Loxone climate controller free

Function blocks with influence on the Heating or Cooling system.Temperature is not consistent across the whole system.Temperature is only reached in certain rooms.In the following you will find further information on possible causes in the event of a message from an Intelligent Room Controller (V2). The messages serves as information as an indicator that there may be something wrong with the Heating or Cooling system. The note ‘Large Difference between Actual (room) Temperature and Target Temperature’ is output if the Room Temperature is at least 3º below the Target Temperature during Heating Operation or at least 3º above the Target Temperature during Cooling Operation. Large Difference between Actual and Target Temperatures The corresponding frost and overheat temperatures can be set in Loxone Config in the parameters of the Intelligent Room Controller (V2) or can be set in the Loxone Smart Home App in Expert Settings. Such damages are, for example, the freezing of pipes in cold conditions or the swelling of wooden floors in excessively hot conditions. The temperature limits for Frost and Overheat protection should be selected so that a warning is only given if damage is possible.

If the overheat protection temperature has been exceeded or the frost protection temperature has been fallen below, immediate measures should be taken to correct the temperature again. Large Difference between Actual and Target Temperaturesįrost and Overheat Protection temperatures server to protect the building.A parameter list is available to download.The following message can be received from the Intelligent Room Controller V2 via System Status or output at the module’s error output: Configuration requires programming skills for the relevant system. Depending on the internet service provider, additional running costs may be incurred in order to meet the described requirements.Īccess to Touch energy management via MOD-BUS/TCPĪ MOD-BUS interface allows the Pelletronic controller to be connected to a building management system. In order to minimise this risk, we recommend the use of client-side security measures for detecting and repelling attacks from the internet.Īn IT expert must be called upon to establish the network connections and set up the IP address, email service and router. In spite of security measures such as encryption of the connection, there is a residual security risk of illegal intervention. Access to the my. and servers must be possible (firewall settings).Port 587 (SMTP) on the internet router must be enabled for sending email (standard on most internet connections).Network connection to programming unit on boiler (alternatively wireless bridge with network cable or DLAN (network via power supply) between master controller and router).Permanent internet connection with router (DSL, UMTS, LWL, cable).If this is not the case, then commissioning of the online function cannot take place and further technical support is required. The requirements must have been met on site by the time of commissioning. Systems with differences from normal operation automatically acquire a higher ranking and a colour coding. The clear and simple design of the user interface is a major benefit. The Support Center allows all systems to be monitored from one access point.

Everyone with responsibility for multiple systems has a complete overview. Furthermore, the platform can be used as a remote maintenance portal (Support Center)īy commercial system operators, customer service installers and ÖkoFEN's in-house Customer Service department alike. This grants full, password-protected access to the programming unit.

#Loxone climate controller Pc

The pellet heating system can be monitored and actively controlled from a PC or smartphone via the my. online portal.

#Loxone climate controller free

All ÖkoFEN boilers are equipped as standard with an Ethernet interface for online access from a PC, smartphone and the free myPelletronic app.